Successfully obtained Reasonably Available Control Technology (RACT) permits for coal-fired and oil-fired boilers which minimized control requirements and saved money for a Pennsylvania university.

Provided alternatives evaluation, design, contractor selection, construction oversight, start-up, and balancing services for a paint spray booth and make-up air system upgrade. New systems minimize worker exposure to solvent vapors.

Managed project to assist seven bakeries to comply with RACT and Title V requirements. Conducted training sessions on air issues. Managed stack testing as part of air permitting process. Negotiations with state regulators allowed for extensions. Facility currently in full compliance

Revised chemical manufacturer’s synthetic minor permit to reduce restrictive conditions, thus saving client $100,000 initial and $50,000 annual costs in testing, without compromising environmental protection.

Provided litigation support and expert testimony for a chemical manufacturer regarding design errors and breach of contract for an industrial ventilation and air pollution control system installation.

Provided air permitting and stormwater/spill planning services for multiple facilities for a metals industry material processor.

Prepared air permit application, including dispersion modeling, for New Jersey bulk pharmaceutical manufacturer and negotiated with agency for favorable permit conditions. Conducted air emissions testing for VOC and ammonia.

Provided expert testimony which supported client's position in air quality lawsuit. Provided recommendations for cost-effective control equipment.

Developed and implemented sales and marketing plan to increase air consulting business.

Obtained positive determination for 100% capture criteria, which minimized the need for future stack testing and saved $50,000 in testing costs for flexographic printing and laminating operation.

Conducted three-phased project to reduce carbon monoxide exposures. Phases included: breathing zone and area sampling surveys to assess CO levels; conceptual design of local exhaust ventilation and make-up air systems; final design plans and specifications of the ventilation system.

Managed projects in air pollution control design, ventilation system evaluation, and environmental regulatory compliance.

Served as senior engineer on air quality permitting, VOC source sampling, dispersion modeling, and clean room design projects.

“Indoor Air Quality for Commercial and Industrial Facilities,” presented at a client seminar in Cheltenham, PA in May 2001, at a NEBB recertification seminar in Hershey, PA in November 2001 and a seminar in February, 2002.

"Ventilation Design for Carbon Monoxide Control in an Iron Foundry," presented at Ventilation '91, 3rd International Symposium on Ventilation for Contaminant Control, September 1991.

"Design Specifications," presented at Controlling Particulates and Toxic Air Emissions With Baghouses and Scrubbers, University of Wisconsin-Madison, May 1989.

"Human Health Risk Assessment of Landfill Gas Emissions," Eleventh Annual Madison Waste Conference-Proceedings, September 1988.

"Ventilation and Air Pollution Control," Metal Finishing Guidebook, 1986.

"Update on Air Toxics Strategy," Plating and Surface Finishing, November 1985.

"Cleanliness Counts: A Guide to the Application of Clean Room Technology in the Printed Circuit Industry," Printed Circuit Fabrication, June 1985.